Lesson - 11/05/07 (7th was May Day!!)

At started the lesson by cutting out my designs I did last lesson. The Boxford router was quick so I had plenty of time to do other things. First I decided to cut out my base. I drew a circle of what size my project be then a 1cm gap and I drew a bigger circle. Then I cut the MDF with a Coping Saw and finally I used the disc sander to smoth the edges. Next I drew out on my softwood the size of my project. Then I put PVA glue on my two slabs of softwood, stuck then together and placed them in a vice so they would stick together well.